Because the self-contained regulating valve does not need external force, it is convenient and quick, so many people in the industry believe that self-propelled regulating valve will become a more promising regulator valve product in the regulating valve. In view of this, many control valve manufacturers have invested more money in the production of self operated control valves. However, as a young product in the regulating valve market, there are still some technical problems that need to be solved slowly. Today, let's talk about the technical problems that need to be solved.

簡述自力式調節閥需要改進的三個方面

This paper briefly describes three aspects of self operated regulating valve that need to be improved

1、調節精度。自力式調節閥是由機械的方法組成的純比例調節系統，不可避免的存在偏差。因此它的適用范圍只能是對于調節精度要求不高的場合。目前，已經有很多的自力式調節閥廠家開始通過在機械加工和材料選擇等等方面的努力，希望能改進自力式調節閥的調節精度。

1. Adjustment accuracy. Self operated regulating valve is a pure proportional regulating system composed of mechanical methods, which inevitably has deviation. Therefore, its scope of application can only be used in occasions where the adjustment accuracy is not high. At present, many self operated regulating valve manufacturers have begun to improve the regulation accuracy of self operated regulating valve through their efforts in machining and material selection.

2、允許的壓差較普通調節閥要小，口徑也受限制。這是由自力式調節閥的工作原理所決定的。自力式調節閥口徑能做到DN250，這對于大部分場合是夠用的，如果在一些特殊場合，只能使用兩臺或多臺并聯。

2. The allowable differential pressure is smaller than that of ordinary regulating valve, and the caliber is also limited. This is determined by the working principle of the self operated regulating valve. The diameter of self operated regulating valve can reach DN250, which is enough for most occasions. In some special occasions, only two or more sets can be used in parallel.

3、由于自力式調節閥的工作原理和結構特點，導致它對介質黏度的要求特別高。因為介質黏度過高容易引起引壓管的堵塞，影響膜片的彈性，導致閥內壓力平衡元件不能正常工作。目前自力式調節閥廠家只能通過推薦介質允許黏度的值，來避免客戶出現上述情況。

3. Due to the working principle and structural characteristics of self operated regulating valve, it has particularly high requirements for medium viscosity. Because the medium viscosity is too high, it is easy to cause the blockage of the impulse pipe and affect the elasticity of the diaphragm, resulting in the failure of the pressure balance element in the valve to work normally. At present, the manufacturers of self operated regulating valve can only recommend the allowable viscosity of the medium to avoid the above situation.

這是目前自力式調節閥需要解決的主要的三個技術問題，相信廣大技術人員的努力之下，一定能夠克服上面的問題，使自力式調節閥獲得更大的發

These are the three main technical problems that need to be solved for the self operated regulating valve at present. I believe that with the efforts of the majority of technicians, we will be able to overcome the above problems and make the self operated regulating valve achieve greater development

以上就是為大家介紹的有關上海良工閥門的詳細介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務http://www.iscro.cn

The above is the detailed introduction of Shanghai Lianggong valve. I hope it will help you If you have any questions, please contact us We will provide you with professional service http://www.iscro.cn